2007 Toyota Sequoia Service and Repair Manual

This factory service and repair manual is written for the 2007 Toyota Sequoia specifically, down to the 4.7L V8 (2UZ-FE) under the hood and the trim the truck left the plant in, so a bearing clearance or a tightening sequence you read here is the figure Toyota issued for this vehicle rather than one approximated from an adjacent model year.

Engines

• 4.7L 4663CC V8 GAS DOHC Naturally Aspirated

Trims

• Limited
• SR5

Known issues on the 2007 Sequoia. Seven recalls are on federal record for this vehicle, and the front suspension accounts for two of them. The first covers the front suspension lower ball joint, where possible improper finishing means some ball joints may experience an incidental deterioration of the internal lubrication. The second is an equipment recall on aftermarket MOOG and NAPA lower ball joints sold for 2004-2007 Sequoias, where a ball joint failure may cause a loss of control, increasing the risk of a crash. Three recalls concern the air bags: one on the passenger-side frontal inflator module, where an inflator explosion may result in sharp metal fragments striking the driver or other occupants, and two more on the passenger's frontal air bag inflator in the event of a crash necessitating its deployment. Another covers the front seat heater, where a damaged copper strand heating element may short circuit, increasing the risk of a fire. The last is a labels recall for failing to comply with the federal tire selection and rims standard, where a driver may overload a vehicle, which may increase the risk of a crash. Owners have logged 194 complaints for the year, and Toyota has issued 83 technical service bulletins.

Whether the job is a ball joint inspection on a high-mileage front end, a seat heater circuit that has quit, or scheduled service on the 4.7L V8, it holds you to Toyota's own procedure and the specification written for this 2007 Sequoia.