2014 GMC Savana 1500 Service and Repair Manual
This factory service and repair manual for the 2014 GMC Savana 1500 covers Base, LS and LT versions of the standard cargo and standard passenger vans, each built with three doors or four, and it lists two engines: a flex-fuel 5.3L V8 and a gasoline 4.3L V6, both naturally aspirated with overhead valves. Everything the shop needs for that combination is arranged by system, from engine mechanical and fuel to transmission, brakes, suspension, steering, restraints, body and electrical, with specifications, torque values, wiring diagrams and diagnostics.
Engines covered
- 5.3L V8 (325 cu in) — OHV, naturally aspirated, flex-fuel
- 4.3L V6 (262 cu in) — OHV, naturally aspirated, gasoline
Body styles covered
- 3-door standard cargo van
- 4-door standard passenger van
- 3-door standard passenger van
- 4-door standard cargo van
Trims covered
- Base
- LS
- LT
Known issues on the 2014 Savana 1500. Seven owner complaints are logged with NHTSA for this model year, two of them on the service brakes, two on the steering and one on the engine. Those three systems get the most attention in any van manual, and this one is no exception: hydraulic brake service with rotor and pad measurements and bleeding procedures, steering gear and linkage inspection with the fastener torque values, and engine mechanical work with the clearances and tightening sequences for both of the engines listed above.
This preliminary information communicates information about how to determine if a wheel and tires size change is available.
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical Assistance Case in CX Connect.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This service bulletin provides information on Tire Sidewall Irregularities.
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customers vehicles that exhibit vibration conditions without utilizing the s
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
Showing the 8 most recent of 389 technical service bulletins on file with NHTSA.
THE TRUCK CAUGHT FIRE IN THE PARKING LOT OF MY WORK
FAILURE TO BRAKE AT LOW SPEEDS. BRAKE PEDAL HARD AND INCREASED STOP DISTANCE IN LOW SPEED, OFTEN TIGHT SPOTS.
WHENEVER YOU TURN THE STEERING WHEEL, THERE IS A NOISE THAT COME FROM IT AND IT SOUNDS LIKE A CLUNKING NOISE AS SOMETIMES WILL NOT LET YOU TURN PAST THAT POINT. IT WILL DO IT WHEN IT IS STATIONARY OR
RADIATOR CORROSION AND LEAKING. OTHER VEHICLES OF THE SAME YEAR HAD SAME CORROSION BUT THIS ONE WAS NOT COVERED . PRODUCED IN SAME PLANT AND TIE AND LOCATION. VEHICLE WAS INSPECTED PRIOR TO THIS AND
AT LOW SPEEDS (PARKING MANEUVERING) BRAKE PEDAL GETS HARD AND BRAKING POWER IS LOST INTERMITTENTLY.
Showing the 5 most serious of 6 complaints filed with NHTSA.
