Every clearance, torque value and diagnostic step in this service and repair manual is scoped to the 2013 Lexus IS 250 as Lexus built it, from the 2.5L V6 (4GR-FSE) to the trim your car left the line in, so you are working to the specification written for this year rather than one carried over from a neighboring model year.
Engines
- 2.5L V6 GAS Naturally Aspirated
Trims
- Base
- F Sport
Known issues on the 2013 IS 250. Two recalls are on federal record for this model year, and both land on the same part. The first, campaign 18V024000, covers the passenger-side frontal air bag inflator module: an inflator explosion may result in sharp metal fragments striking the driver or other occupants. The second, campaign 19V005000, is a separate action against that same passenger-side inflator module, with the same consequence. Owners have filed 13 complaints for the year and Lexus has issued 103 technical service bulletins. The diagnostic and repair procedures behind the restraint system and the rest of those systems are here.
From restraint-system work to a scheduled service interval, it keeps you on the OEM procedure and the correct specification for your specific 2013 IS 250.
WHILE PARK AT A STOP LIGHT, THE AUTO, THIRD IN LINE WAS IMPACTED BY A TRUCK TRAVELING 40-50 MPH, NO BRAKING, AND HIT AND RUN. MY WIFE WAS ALONE IN THE CAR, WHICH WAS DRIVEN INTO A PICKUP AND SUBSEQUENTLY INTO A BUICK. OF THE 12 AIRBAGS AVAILABLE, NOT ONE ACTUATED, CAUSING SERIOUS INTERNAL AND EXTERNAL BRUISING WITH THE SEAT BELT AND STEERING WHEEL IMPACT. THE DRIVERS SEAT BROKE LOOSE FROM ITS MOUNTING, DAMAGE MORE THAN $50,000. IN ADDITION, A BROKEN WRIST RESULTED. COMPLAINTS TO THE LO
TL* THE CONTACT'S MOTHER OWNS A 2013 LEXUS IS 250. WHILE THE DRIVER WAS ATTEMPTING TO PARK THE VEHICLE, THE GEAR SHIFT LEVER WAS PLACED IN PARK WITH THE BRAKE PEDAL DEPRESSED. SUDDENLY, THE VEHICLE ACCELERATED INDEPENDENTLY, DROVE OVER A CURB, STRUCK A TREE, AND STRUCK A PARKED VEHICLE. THE AIR BAGS FAILED TO DEPLOY. A POLICE REPORT WAS FILED. THE DRIVER WAS INJURED AND SOUGHT MEDICAL ATTENTION AT THE EMERGENCY ROOM. THE VEHICLE WAS TOWED TO A COLLISION CENTER. THE VEHICLE WAS NOT DIAGNOSED AND
This model was affected by the originally cosmetic, but well documented "sticky dash" recall. I am an automotive enthusiast who has worked within the industry for over 12 years, including notifying customers of NHTSA recalls and assisting with scheduling recalls to be performed. The dashboard can be severely melted to the point of becoming a mirror finish, I was driving at night in the headlights from an opposing truck reflected off the shiny surface of the dashboard having been melted by sun
See attached document for complaint.
I am writing to bring to your attention the grave matter of odometer rollback fraud, consumer law violations, and a series of fraudulent activities that have occurred in connection with my recent vehicle purchase. I am seeking a settlement of $60,000 to rectify the significant damages and hardships I have endured as a result of these unethical practices. The issues at hand stem from the fraudulent rollback of the odometer by 100,000 miles on the vehicle I purchased from a moving rides dealership
THE ENGINE COULD STALL IN THE MIDDLE OF DRIVING BECAUSE OF MISFIRE. MY LEXUS 250 ONLY 40K MILEAGE AND ALWAYS DO PROPER MAINTENANCE TO THE ENGINE EVERY 3000 MILE. I DO RESEARCH THAT LEXUS IS 250 CAUSE CARBON BUILD UP BECAUSE OF THE WRONG DESIGN OF THE DIRECT INJECTION. HERE'S THE YOUTUBE LINK: HTTPS://WWW.YOUTUBE.COM/WATCH?V=YTQUQFLAWR8. I BROUGHT THE CAR TO LEXUS DEALER, THEY WON'T ADMITTED, INSTEAD THEY BLAME ME USING A WRONG FUEL. BEFORE I USED 91OCTANE SHELL, THEN I SWITCH TO 91OCTANE CHEVRON
WHEN STEERING WHEEL IS TURNED TO THE RIGHT WHILE DRIVING. A METAL SCRAPING NOISE OCCURS. THIS HAS BEEN FIXED SEVERAL TIMES BUT KEEPS OCCURING MORE OFTEN. THIS ONLY HAPPENS WHEN CAR IS IN MOTION. AND I BELIEVE IT HAS SOMETHING TO DO WITH THE PLACEMENT OF THE BRAKE SHIELD. AS IF SOMETHING IS PRESSING ON IT.
THE PROBLEM THAT MANY IS250 LEXUS OWNERS ARE HAVING WITH THE FRONT TIRES WEARING OUT OR TEARING FROM THE INSIDE. I HAVE FOUND THAT THE ISSUE IS THE SUSPENSION WHERE THE FRONT TIRE AND A COTTER PIN MEET EVERY TIME YOU HIT A BUMP OR POT HOLE. THIS HAS CAUSED GREAT DAMAGE TO BOTH FRONT TIRES TO THE EXTENT WHERE YOU CAN SEE THE STEEL BELT. LEXUS HAS GONE AS FAR AS TO BLAME THE TIRE MANUFACTURE AND HAS NOT TAKEN RESPONSIBILITY FOR THE PROBLEM. I ASK THAT THIS ISSUE BE INVESTIGATED BEFORE A LIFE IS LO
VALLEY PLATE LEAK DUE TO THE FACT THAT TOYOTA/LEXUS UTILIZED THE IMPROPER SEALANT AND USED THE IMPROPER AMOUNT, LEADING TO THE HEAT EXCHANGER LEAKING COOLANT ONCE THE ORIGINAL, INADEQUATE SEALANT BEGINS TO DISENTEGRATE. THIS COULD CAUSE A CONDITION WHERE THE ENGINE COULD FAIL AND SOMEONE COULD GET HURT. FURTHERMORE, ALL ISFS WILL EVENTUALLY HAVE A CRACKED RH MANIFOLD ON THE #8 RUNNER. THIS CAN CAUSE A FIRE HAZARD IN ADDITION TO CARBON MONOXIDE POISONING.
EXHAUST HEADER LEAK, AUDIBLE TICKING SOUND ONCE WARMED UP IN DRIVE
The dashboard is melting - it is sticky and shiny. The glare it causes on the windshield is horrific. I have a very difficult time seeing when the sun is out. An independent service center has inspected and confirmed it is caused by the melting dashboard. I first noticed it a few months ago. I travel to Nashville often, which is a 3.5 hour drive, and the sight obstruction at interstate driving speeds and traffic is challenging to say the least. I am afraid to drive my car with my granddaug
THE FUEL PUMP FAILED WHILE DRIVING ON THE HIGHWAY, CAUSING THE MOTOR TO STALL AND DIE. WAS UNABLE TO RESTART THE MOTOR AND WAS TOWED FROM THE HIGHWAY TO A DEALER WHERE THE FUEL PUMP WAS REPLACED.
TL* TAKATA RECALL. THE CONTACT OWNS A 2013 LEXUS IS 250C. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 18V024000 (AIR BAGS); HOWEVER, THE PARTS TO DO THE REPAIR WERE UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE CONTACT CALLED A LOCAL DEALER (LEXUS OF RIVERSIDE, 3150 ADAMS ST, RIVERSIDE, CA 92504) AND WAS INFORMED THAT THE REMEDY WAS ON BACKORDER FOR APPROXIMATELY TWO WEEKS. THE MANUFACTURER WAS NOT NOTIFIED
