This 2010 Audi RS6 factory service and repair manual is matched to this exact year and trim, so every specification and torque sequence it gives is the one Audi published for your car rather than a close-enough figure carried over from a neighboring model year.
Engines covered
- 5.0L V10 (305 cu in) — DOHC, turbocharged, gasoline
Body styles covered
- 4-door sedan
- 4-door wagon
Trims covered
- Base
- Avant
Known issues on the 2010 RS6. No recalls are on federal record for the 2010 RS6, and no complaints or technical service bulletins are logged for the year either. That clean federal record makes a full factory reference even more valuable, since there is no bulletin trail to lean on and the correct procedure has to come straight from Audi's own documentation.
Whether you're working through a scheduled service interval or a deeper mechanical job on the Sedan or Avant, it keeps you on the OEM procedure and the correct specification for your specific 2010 RS6.
This bulletin provides information on the additional reporting requirements for safety related inquiries.
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, th
Showing the 8 most recent of 108 technical service bulletins on file with NHTSA.
