This factory service and repair manual for the 2007 Chevrolet T7500 documents one engine and two configurations. The engine is the turbocharged 7.8L diesel inline-six of 475 cubic inches; the configurations are F7B042 and T7F042 versions of the low tilt cab straight truck. Because the cab tilts to reach the engine, the sequence of a major repair differs from a conventional truck, and the procedures are written for that access, complete with the specifications and torque values each stage requires.
Engines covered
- 7.8L inline-six (475 cu in) — turbocharged, diesel
Body styles covered
- Straight truck, low tilt
Trims covered
- F7B042
- T7F042
Known issues on the 2007 T7500. Federal regulators hold no recalls and no owner complaints for this model year. The manual is built around the work rather than around a defect, and its coverage is what a shop needs on a medium-duty diesel: fuel injection and induction diagnosis, cooling and lubrication requirements under load, engine mechanical procedures with the measurements that govern reuse of a part, torque figures given where each fastener is installed, and wiring diagrams that carry every circuit from its supply through the harness to its ground.
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
Showing the 8 most recent of 129 technical service bulletins on file with NHTSA.
